Termites work the day shift, the night shift, weekends, and even holidays!

Termites work silently and invisibly sawing into your floor joists, cutting into your wall studs, hollowing out the heart of your home and hiding the damage until it’s too late. They don’t even need to return to the ground once they find a source of moisture above ground!

One of the greatest hazards any homeowner faces is termites, which may do more damage than fires, storms, and earthquakes combined! Termites survive by eating wood, paper, fiberboard, cotton fabrics, and other cellulose products. If ignored, termites can actually threaten the structural integrity of your home!

This is how A-ALL Pest Control thoroughly controls Termites...

Interior

1. Partition wall void to be drilled center of void. Application of Termidor in foam form shall be applied at a rate consistent with label recommendations. ALL holes to be sealed.

2. If upon inspection, it is determined a ceiling joist, plate, wall stud, etc. is infested with Termites, these wood members shall be drilled and pressure treated with Termidor.

3. Interior perimeter of garage floor will be drilled through at approx. 10-12 inch intervals and Termidor applied through these holes will be consistent with label specifications. ALL holes to be sealed.

Exterior

1. Soil areas adjacent to foundation to be trenched approx. 6 inches deep and 6 inches wide. Termidor will be applied at a rate consistent with label specifications. A soil injection rod will be used to inject Termidor to the level of footing. Trench will be backfilled and soil to be treated with Temidor consistent with label specifications.

2. Cement areas such as patios, walkways, etc. adjacent to the foundation will be drilled through at approx. 10-12 inch intervals and Termidor applied through these holes will be consistent with label specifications. ALL hole to be sealed.

3. Hollow block walls shall be drilled through into voids and Termidor foam will be applied at a rate consistent with label specifications. ALL holes to be sealed.

4. Brick veneer, stone veneer, shall be drilled through in mortar seems to allow foam application of Termidor in hollow space between walls. ALL holes to be sealed.

5. Hollow support columns to be drilled into and Termidor foam applied. Solid wood columns are drilled and pressure treated with Termidor. ALL holes to be sealed.

A-ALL Pest Control Termite treatments carry a 5 year renewable and transferable GUARANTEE!

To find out more about termites click here

For the best Termite Control Service in the business call: (480)830-5333